An asphalt driveway is the smooth, jet-black welcome to your home, and on a ranch or an estate it is often a long one: from the county road to the gate, from the gate to the house, around to the barn and the shop. Those drives carry trucks, trailers and equipment as well as cars, and they take the strain of Texas sun and heavy rain. We build them to handle it.
Elite Asphalt has paved driveways for homes, ranches and estates across North Texas since 2001. Our residential crew works out of the Granbury office with the same pavers, rollers and graders we use on commercial lots, so a long drive is paved continuously and compacted properly rather than in short pieces. We also lay chip and seal if you prefer the natural stone look, and we will price both.
Driveways we build
- New asphalt driveways on new homes and ranch properties
- Replacing a gravel or dirt drive that washes out or throws dust
- Replacing an old asphalt or concrete drive that has failed
- Long estate drives, loops and circles, with parking areas at the house
- Drives and aprons to barns, shops, carports and outbuildings
- Private roads shared by a few homes
Built on a base, not on dirt
Whatever the surface, a driveway is only as good as what it sits on. We grade the drive for drainage with a crown and ditches where they are needed, repair or build up the base and compact it, and stabilize it where the ground is soft clay. Then the asphalt is paved with our own paver, rolled to density and left to cure. Drives that carry trailers, equipment or delivery trucks get a thicker section; we size it for how the drive will be used, not for the lowest number.


Asphalt, chip and seal or concrete
Asphalt is the smoothest and most durable of the three and the usual choice for a drive that sees daily traffic, a basketball goal or a boat trailer. Chip and seal costs less, needs no sealcoating and suits a long rural run with its natural stone look. Concrete costs the most and lasts well with little upkeep. We build all three and will tell you honestly which one fits your drive, your ground and your budget. If your current asphalt drive is worn but sound, resurfacing may be the better value than a new one.


Looking after it
A new asphalt drive needs little: keep heavy loads off it for the first days, avoid turning the wheels in place while it is new, and have it sealcoated a few years in and every few years after that to protect it from sun and water. Cracks that open up are sealed before they let water into the base. We give you a short maintenance plan with every drive we pave.


Driveways we have paved







